1020 with Check software

- Weighing unit using passive sense, 1600 Samples per second
- 2,8” 320x240 Color LCD display
- Panel Mount

  DC power supply:
-18 - 32Vdc (24Vdc type) 4W max. 
 
Inputs:

- 3 Inputs  Optical isolated, 1 common, 18 - 28 Vdc PNP or NPN
- Input 1 = Start/Stop
- Input 2 = Start Sampling
- Input 3 = Reject Sensor

 
Outputs:
- 4 Outputs Isolated PhotoMOS, 1 common, max. 35 Vdc or Vac, 0.5A nominal, 1A Surge PNP or NPN
- Output 1 = Rejector
- Output 2 = Sampling Busy
- Output 3 = Transport Belts
- Output 4 = Alarm

Analog Output:
- Passive analog output, the analog output is used for the belt speed of the weighing section
0 - 20 mA
4 - 20 mA
0 - 24 mA
4 - 24 mA
0 - 10 V (with a 500 ohm resistor)


- For Certified or Industrial applications
- USB-port for easy calibrating via a PC
- Ethernet, CANbus, RS232 and RS422 communication

Communication can be used for:
Ethernet:
- Communicate with PC
- Communicate with PLC (Ethernet IP, Fins and Modbus TCP protocol)
- Communicate with other PENKO Flex devices with Ethernet (PENKO TP protocol)
- Printing

CANbus (Slave):
- Communicate with PENKO Flex devices

RS232:
- Communicate with PC
- Communicate with PLC with ASCII, NPV Slave, HL Viewteq, HL PLC, Modbus RTU and Modbus ASCII
- Communicate with PENKO Flex devices
- Printing

RS422:
- Communicate with PC
- Communicate with PLC with ASCII, NPV Slave, HL Viewteq, HL PLC, Modbus RTU and Modbus ASCII
- Communicate with PENKO Flex devices
- Printing